Auto-Regulated Cobblestone Generator — Applied Energistics 2 — руководство (Applied Energistics 2) | Вики PiglinMine
Example Setups

Auto-Regulated Cobblestone Generator

Мод не переведён на русский — текст на английском, как в игре. Рецепты и предметы ниже — с нашими названиями.

Auto-Regulated Cobblestone Generator

Automation of a cobblestone generator is simple, just face an МЭ плоскость уничтожения into a standard vanilla manual cobblestone generator. However, doing this will eventually jam your network full of cobblestone, so some regulation is desired.

Due to how annihilation planes work (they act like Мэ шина импортаses), we cannot simply put a МЭ излучатель уровня facing an МЭ шина экспорта with a Редстоуновая карта (since you cannot go directly import to export with no storage in between). We have to be a bit more roundabout.

МЭ шина переключенияses allow you to connect and disconnect parts of your network with redstone signals, but they cause the network to reboot whenever they do this. There is a simple workaround: put the toggle bus on a subnetwork such that it only reboots the subnet.

We can have a self-contained МЭ плоскость уничтожения and МЭ шина хранения subnetwork push into an МЭ-интерфейс on the main network. The toggle bus will connect and disconnect the subnet from a Кварцевое волокно, cutting power to the planes.

Configurations

How It Works

  1. The cobblestone generator makes some cobblestone.
  2. The МЭ плоскость уничтоженияs break the cobblestone.
  3. The МЭ шина хранения stores the cobblestone in the МЭ-интерфейс, sending it into the main network.
  4. When the amount of cobblestone in the main network exceeds the set amount, the МЭ излучатель уровня stops sending a signal, turning off the МЭ шина переключения.
  5. This cuts power to the subnetwork, stopping the annihilation planes from working.