Entity Accelerator
The Entity Accelerator consumes energy from the AE2 network to accelerate block entities in the front block space, functioning similarly to a “Speed Torch”.
Operating Mechanism
- Activation Requirement: The accelerator must contain at least one
Карта ускорения сущностей (x2) to enable acceleration. - Acceleration Effect: Can accelerate block entities up to 1024×.
- Energy Supply: Acceleration continuously consumes AE network energy. When AE energy is insufficient, acceleration automatically pauses until energy is restored.
- If the Applied Flux mod is installed, FE energy stored in network disks can be consumed to continue acceleration when AE energy is insufficient (priority configurable).
- Configuration Options: Base energy consumption, entity blacklist, and per-entity energy multiplier can be adjusted via the config file.
Energy Consumption Mechanism
Base Energy Calculation
The energy consumption of the Entity Accelerator is determined by the base configuration value baseCost and the target acceleration multiplier.
Let:
- ( M ) = target multiplier (2, 4, 8, ..., 1024)
- ( B ) = base energy config (default 512)
- ( L ) = log₂(M)
Base energy consumption formula:
Base Energy Reference Table (baseCost = 512)
| Multiplier | Base Energy (AE) |
|---|---|
| 2 | 256 |
| 4 | 1,024 |
| 8 | 2,048 |
| 16 | 8,192 |
| 32 | 16,384 |
| 64 | 65,536 |
| 128 | 131,072 |
| 256 | 524,288 |
| 512 | 268,435,456 |
| 1024 | 2,147,483,648 |
Energy Card Efficiency
Installing Energy Cards reduces power consumption. The effect increases with the number of cards but has diminishing returns.
Let ( N ) = number of installed energy cards
Energy Ratio Formula:
Energy Card Efficiency Table:
| Number of Cards | Efficiency | Actual Energy Ratio |
|---|---|---|
| 0 | 0% | 100% |
| 1 | 10% | 90% |
| 2 | 14.5% | 85.5% |
| 3 | 17.15% | 82.85% |
| 4 | 19.0% | 81.0% |
| 5 | 20.21% | 79.79% |
| 6 | 21.15% | 78.85% |
| 7 | 21.9% | 78.1% |
| ≥8 | 50% | 50% |
Final Energy Calculation
Final Power Formula:
finalPower = basePower × energyRatio
Calculation Example:
- Target Multiplier: 64×
- Energy Cards Installed: 3
- Base Energy: 65,536 AE
- Energy Ratio: 82.85%
- Final Energy Consumption: 65,536 × 0.8285 ≈ 54,267 AE
Actual energy consumption may vary depending on entity-specific configuration.