Faulty Memory Card

The Faulty Memory Card is an incorrectly assembled memory card that glitches in a few advantageous ways. It mainly helps out with repetative memory card tasks like copying to many devices or setting up storage busses with increasing priority.

The Faulty Memory Card is used like a memory card, sneak use on a device to copy its settings and use on a device to paste out the settings. Additionally you can sneak use the card on the air to cycle through the modes or just use on the air to do mode specific things (mainly cycle sub-modes).

Modes

AoE Paste

This mode will paste to any part in a square area around the part intially used on. This only affect parts that are facing the same direction as the initial one. Using on air will cycle the size of the AoE.

Global Paste

This mode will paste to any part on the network that's of the same type initially pasted too. Be very careful

Incrementing/Decrementing

This mode will either increment or decrement the priority or level emitter amount by one each time the settings are pasted. It can be cycled between incrementing or decrementing by using on the air.

Über

A mode that might be familar to users of the uber conduit probe. Use on a block to start selecting a volume to paste too. Use again to finalize the volume and paste to every device facing the same direction as the face or part it was used on. Additionally, copying a device's configuration will reset the volume selection.