Док морского разведчика (Sea Scout Dock) — как скрафтить в Nautec 2 | Вики PiglinMine
Док морского разведчика
Блоки · Nautec 2

Док морского разведчика

Sea Scout Dock
СборкаРецепты ниже — для мода без изменений

Док морского разведчика — блок из мода Nautec 2.

Как работает #how

Из книги «NauTec 2 — руководство» — Sea Scout Dock[1]

Sea Scout Dock A charging pad for a parked hull. The Sea Scout Dock charges a Sea Scout parked over it, holds an empty hull in place, and keeps the crew breathing. Setting It Up The dock is a low pad that can be placed under water. Power it with a laser beam of at least 20 AP from any side (see Laser Power). The beam only has to be present: the dock does not use it up, so the hull charges at the same rate however strong the beam is. Park the hull over the pad. It counts as docked when it overlaps the 3 by 3 area directly above the pad, up to 3 blocks high. The dock clamps with a clunk when it takes hold and releases when the hull leaves or the beam drops below 20 AP. Looking at the pad through a Prism Monocle shows whether a Sea Scout is docked. What It Does Charges the hull at 40 power per tick on a 20 AP beam, about 21 minutes from empty to full, without picking the hull up. A stronger beam charges faster (see below). The rate is configurable. Holds an empty hull still, so what you leave on the pad is still there when you come back. A pilot always overrides the clamps and can drive…

Мод не переведён — текст книги на английском, как в игре.

Читать запись целиком

Получение #obtain

Делают по 1 рецепту: верстак.[2]

Источники

  1. Встроенная книга «NauTec 2 — руководство», запись «Sea Scout Dock»
  2. Рецепты из jar модов без изменений сборок